.75" Black Adhesive Cable Tie Mounts 100/bag Part #CM75-0C
.75" Black Adhesive Cable Tie Mounts 100/bag Part #CM75-0C is available to buy in increments of 1
.75" Black Adhesive Cable Tie Mounts 100/bag Part #CM75-0C Size: .75" x .75" Color: Black Maximum Cable Tie Width: .14" Maximum Tensile Strength: 40lb Center Hole Size: #6 Screw Qty/Bag: 100 4-Way Self Adhesive Cable Tie Mounts are designed to help mount cable ties directly to a solid surface. Adhesive bases can be attached to metal, plastic, glass, and other clean surfaces. Provide an easy solution to securing cables and staying organized with self-adhesive cable tie mounts. A screw is highly recommended for extra holding strength when used outdoors. Bases are made with acrylic adhesive. The counter-sinked screw hole will not interfere with the cable ties. Features • Superior acrylic adhesive for long term reliability • 4-way cable tie entry makes part orientation fast and easy • UL Listed • Meets UL94V-2 Flammability Classification Benefits • Adhesive backing allows routing of wires and cables where mounting holes cannot be drilled • Secured to the surface by the adhesive tape on the back after the backing paper is peeled off • May be secured using a self-tapping screw UV Black Cable Tie Mounts • Greater resistance to damage caused by ultraviolet light – indoor or outdoor use • UV Black Nylon 6/6 is used in continuous or extended exposure to outdoor sunlight. • UV Black Cable Tie Mounts are a weather resistant grade, enduring additional ultraviolet (UV) light. • This grade is produced by incorporating stabilizers in the nylon resin. UV Stabilized Nylon cable tie mounts are available only in black.